Zachary Hall Zachary Hall's Profile Page

Zachary Hall Zachary Hall

0 Course Enrolled • 0 Course Completed

Biography

NS0-093 test online - Network Appliance NS0-093 test dumps insides

Our services before, during and after the clients use our NS0-093 certification material are considerate. Before the purchase, the clients can download and try out our NS0-093 learning file freely. During the clients use our products they can contact our online customer service staff to consult the problems about our products. Our company gives priority to the satisfaction degree of the clients on our NS0-093 Exam Questions and puts the quality of the service in the first place. We also have free demo of our NS0-093 learning guide for you to check the quality before your payment.

The NS0-093 certification exam is recognized globally and is highly regarded by IT professionals. NetApp Accredited Hardware Support Engineer certification provides a competitive advantage to professionals in the IT industry, as it demonstrates their expertise in supporting NetApp hardware products. Achieving the certification also validates the candidate's ability to troubleshoot and maintain NetApp hardware products, which are essential for organizations that rely on NetApp storage solutions.

Network Appliance NS0-093 Exam is an industry-recognized certification that validates the knowledge and skills required to provide high-level technical support for NetApp storage systems. By passing NS0-093 exam, candidates can enhance their career prospects and demonstrate their expertise in storage systems support. With the increasing demand for storage systems support professionals, the NS0-093 certification can be a valuable asset for IT professionals looking to advance their career in this field.

>> NS0-093 Prep Guide <<

Positive NS0-093 Feedback | NS0-093 Latest Study Notes

At PrepAwayPDF, we are proud to offer you actual NS0-093 exam questions in our Network Appliance NS0-093 practice exam material. This actual study material has been checked and approved by leading professionals in the field. A team of over 90,000 experts and professionals have collaborated to design the NetApp Accredited Hardware Support Engineer (NS0-093) exam material, ensuring that you receive both theoretical knowledge and practical insights to excel in the NetApp Accredited Hardware Support Engineer exam.

Network Appliance NetApp Accredited Hardware Support Engineer Sample Questions (Q36-Q41):

NEW QUESTION # 36
In a SAS stack of shelves, what is the topology of the connection between expander and disk?

A. ring
B. loop
C. point-to-point
D. arbritrated loop

Answer: C

Explanation:
In a SAS stack of shelves, the connection between the expander and the disk uses a point-to-point topology.
* Point-to-Point:
* Each SAS disk in a shelf connects directly to the expander using a dedicated channel. This ensures that communication between the disk and expander is independent of other disks, improving performance and reliability.
* Why SAS Uses Point-to-Point:
* SAS (Serial Attached SCSI) eliminates the shared bandwidth limitations of traditional bus architectures (e.g., arbitrated loop or ring) by dedicating a connection to each device.
Key Details:
* A. arbitrated loop:
* Arbitrated loop is a topology used in Fibre Channel systems, not SAS.
* C. loop:
* SAS does not use loop-based communication; this is typical of older technologies like SCSI Parallel Interface (SPI).
* D. ring:
* Ring topology is not used in SAS stacks.
Why Other Options Are Incorrect:
* "NetApp SAS Shelf and Disk Configuration Guide" specifies point-to-point communication between expanders and disks in SAS environments.
References:

NEW QUESTION # 37
What are two valid commands that can be used to trigger an AutoSupport? (Choose two.)

A. ::> autosupport invoke-core-upload -node <nodename>
B. ::> autosupport invoke -node <nodename> -type all
C. ::> autosupport history show-upload-details -node <nodename>
D. ::> system node coredump upload -node <nodename>

Answer: A,B

Explanation:
To trigger an AutoSupport message in ONTAP, the following commands are valid:
* What it does:This command manually triggers a complete AutoSupport message of type "all." This includes logs and system information from all subsystems.
* How to use:
* Run the command: autosupport invoke -node <nodename> -type all
* Replace <nodename> with the name of the node for which you want to generate the AutoSupport message.
* Why it's relevant:This is the primary method for triggering a full AutoSupport message manually. It is commonly used during troubleshooting to provide comprehensive system data to NetApp Support.
1. ::> autosupport invoke -node <nodename> -type all
* What it does:This command is specifically used to upload core files (e.g., kernel or user space cores) from a node to NetApp Support for analysis.
* How to use:
* Run the command: autosupport invoke-core-upload -node <nodename>.
* Replace <nodename> with the name of the node for which you want to upload core files.
* Why it's relevant:If there is a system panic or other critical issue, this command ensures that core files are included in the AutoSupport message for detailed analysis.
2. ::> autosupport invoke-core-upload -node <nodename>
* A. ::> autosupport history show-upload-details -node <nodename>:
* This command displays the history of AutoSupport uploads but does not trigger a new AutoSupport.
* B. ::> system node coredump upload -node <nodename>:
* This command uploads coredumps directly to a support server but does not trigger an AutoSupport message.
Why Other Options Are Incorrect:
* "ONTAP 9 AutoSupport Configuration Guide" confirms autosupport invoke as a valid command to trigger AutoSupport messages.
* "ONTAP CLI Reference Manual" specifies autosupport invoke-core-upload for core file uploads.
References:

NEW QUESTION # 38
You have replaced a failed boot device. You perform boot_recovery and receive no errors. However, when the node reboots, it reports that it has no disks.
What are two possible causes? (Choose two.)

A. The interconnect is down.
B. The SAS cables were incorrectly reconnected after reinstalling the motherboard.
C. The disks that are owned by this node have been marked as failed.
D. The node is booting a lower version of ONTAP software than was last used.

Answer: B,D

Explanation:
Possible Causes for "No Disks" Error:
* A (Incorrect SAS Cabling): If the SAS cables are incorrectly reconnected or swapped after replacing the boot device, the disks may not be detected because the physical connection to the shelves is compromised. Verifying and reseating the SAS cables is essential.
* C (Lower ONTAP Version): If the node boots into an ONTAP version that is lower than the version previously used, it might not recognize the RAID labels or disk metadata created by the higher ONTAP version.
Why Other Options Are Incorrect:
* B (Disks Marked as Failed): Disks that are marked as failed would still be visible in the system, though unusable.
* D (Interconnect Down): An interconnect failure affects HA functionality but does not prevent a node from detecting its own disks.
NetApp Reference Documentation:
* Refer to the "ONTAP Boot Recovery Guide" and "SAS Cabling Guide" for steps to resolve disk detection issu

NEW QUESTION # 39
In which two sections of AutoSupport can you find information to analyze the following panic? (Choose two.) Panic_Message: PCI Error NMI from device(s):ErrSrcID(CorrSrc(0xf00),UCorrSrc(0x18)), RPT(0,3,0):
Qlogic FC 16G adapter in slot 1 on Controller

A. SSRAM-LOG
B. HA-RASTRACE.TGZ
C. PCI-HIERARCHY.XML
D. ALL-COREDUMP.XML

Answer: A,B

Explanation:
To analyze the provided panic error, the two sections of AutoSupport that are essential for investigation are:
* What it is:HA-RASTRACE.TGZ contains HA (High Availability) system trace logs. It records hardware diagnostics, error traces, and the HA system's response to hardware events. These logs are critical when analyzing hardware-related panics, including those caused by PCI errors.
* Why it's relevant to the panic:In the given panic message, the NMI (Non-Maskable Interrupt) error originates from a Qlogic FC 16G adapter. HA-RASTRACE.TGZ will provide detailed diagnostics, including the error reporting from the HA interconnect and other hardware diagnostics. Specifically, it may include information about how the system detected the PCI fault and any actions taken to protect the system state.
* How to analyze:
* Extract the HA-RASTRACE.TGZ file from the AutoSupport bundle.
* Review hardware-related trace messages for entries associated with the PCI bus or the Qlogic FC adapter.
* Look for specific error codes or keywords like PCI Error, NMI, or Qlogic.
* References:
* NetApp's "AutoSupport Logs and Diagnostics Guide" highlights HA-RASTRACE.TGZ as a primary resource for debugging hardware faults.
* The "Panic Troubleshooting Guide" for ONTAP systems specifies HA-RASTRACE as a key source for identifying NMI-related errors.
1. HA-RASTRACE.TGZ
* What it is:SSRAM-LOG records low-level hardware error details, including PCI device register states and uncorrectable memory errors. It is particularly useful for analyzing errors originating in peripheral hardware like network or storage adapters connected via PCI.
* Why it's relevant to the panic:The panic message explicitly references a PCI Error NMI caused by a Qlogic FC adapter. SSRAM-LOG captures detailed state information for PCI devices, which can help identify whether the fault originated in the adapter hardware, the PCI bus, or another related component.
* How to analyze:
* Extract the SSRAM-LOG from the AutoSupport bundle.
* Search for PCI-related errors, including the specific error source IDs (e.g., ErrSrcID(CorrSrc (0xf00),UCorrSrc(0x18))).
* Review the log entries to confirm the root cause of the NMI.
* References:
* The "Hardware Diagnostics and Troubleshooting Guide for ONTAP" lists SSRAM-LOG as a key file for debugging PCI errors.
* NetApp's documentation on PCI diagnostics emphasizes the use of SSRAM-LOG for validating hardware-level faults.
2. SSRAM-LOG

NEW QUESTION # 40
Which type of AutoSupport message would you expect to see triggered automatically when ONTAP software detects a NetApp WAFL inconsistency on an aggregate?

A. MEDIUM ERROR DURING RECONSTRUCTION
B. CHECKSUM ERROR
C. WAFL INCONSISTENT USER DATA BLOCK
D. WAFL INCONSISTENT BLOCK

Answer: D

Explanation:
When ONTAP detects a WAFL inconsistency in an aggregate, it automatically generates an AutoSupport message with the description WAFL INCONSISTENT BLOCK.
* WAFL INCONSISTENT BLOCK:
* This error indicates that WAFL metadata or user data blocks have been found to be inconsistent.
* ONTAP triggers an automatic AutoSupport message to notify administrators and NetApp Support.
Key Details:
* A. MEDIUM ERROR DURING RECONSTRUCTION:
* This error occurs during disk reconstruction, not due to WAFL inconsistencies.
* B. CHECKSUM ERROR:
* A checksum error indicates a disk-level data integrity issue, not a WAFL inconsistency.
* C. WAFL INCONSISTENT USER DATA BLOCK:
* While related, this is not the specific AutoSupport message triggered by ONTAP.
Why Other Options Are Incorrect:
* NetApp "ONTAP WAFL Troubleshooting Guide" describes AutoSupport messages related to WAFL inconsistencies.
References:

NEW QUESTION # 41
......

Many candidates ask us if your NS0-093 original questions are really valid, if our exam file is really edited based on first-hand information & professional experts and if your NS0-093 original questions are really 100% pass-rate. Maybe you have a bad purchase experience before. I want to know that if you chose providers attentively before. Hereby, I can assure you that please rest assured all we guaranteed will be achieved. We are a legal authorized company which provides valid NS0-093 Original Questions more than 6 years and help thousands of candidates clear exams and obtain certification every year.

Positive NS0-093 Feedback: https://www.prepawaypdf.com/NetworkAppliance/NS0-093-practice-exam-dumps.html

Zachary Hall Zachary Hall

Biography

Join Our Community